88
CHAPTER 8
Maintenance
Cleaning the foil squeegee
Wipe the foil squeegee with ThermApprove cleaning cards or a clean, lint-free cloth moistened
with 99% isopropyl alcohol and let air dry.
Replacing maintenance parts
You will need to replace material or foil squeegees on a yearly basis and fuses as required. One
set of replacement maintenance items are included in the accessories box. Use the chart below to
keep record of the replacement dates.
Maintenance part Frequency Replacement dates
Foil squeegee yearly (or sooner if needed)
Bail arm material squeegees yearly (or sooner if needed)
Fuses as needed
Replacing the foil squeegee
Replace the foil squeegee immediately if it is bent or damaged. Even if the foil squeegee is
undamaged you should replace it once a year. Remove the four Phillips head screws that attach
the foil squeegee making note of its position. Discard the squeegee. Attach the new foil
squeegee using the same screws. One replacement foil squeegee is included in the original
accessory box. Additional squeegees can be obtained from GSP Customer Service.
Foil squeegee
Print head
To Next Page
Loading...
