Gerber EDGE FX - Page 98

92
GERBER EDGE FX
Index
History...............................................70
Homing the printer..........................36
Humidity range..................................6
Input/Output Tests .........................74
Installing hardware..........................25
Internal tests......................................72
Keypad test .......................................81
Language...........................................56
version ...........................................70
Lifting of images...............................66
Lines in print.....................................65
Maintenance
of printer........................................85
schedule.........................................88
Material
and foil combination....................33
cleaning....................................27, 65
EDGE READY...............................27
family .............................................33
handling.........................................66
loading ...........................................38
normalizing...................................27
recommended .........................27, 66
storage and handling...................27
substituting .............................33, 41
Material Selection List .....................54
Material squeegee ............................86
Menu Tree
Diagnostic......................................96
Main/System ................................95
Message display ...............................35
Message log.......................................80
Messages............................................63
Mode, Single or Cont.......................37
Motion menu ....................................36
Network addresses ..........................67
assigning from front panel..........11
Network connection ....................7, 17
checking.........................................24
Network settings ..............................58
DHCP.............................................59
Network throughput .......................69
Normalizing material ......................27
Numeric units...................................55
OMEGA
Device Manager............................26
installing hardware......................25
Out-of-vinyl sensors ........................57
Overlap.............................................. 51
Packing list.......................................... 5
Packing the printer ............................ 5
Pausing a job..................................... 45
Ping command ................................. 24
Power requirements .......................... 6
Powering on the printer.................... 7
Primer, use of ................................... 66
Print mode ........................................ 33
Print Options .............................. 33, 66
Printer name ..................................... 49
Printing a job .................................... 36
Printing a test job ............................. 68
Read/write test, RFID..................... 72
Registration
color to color ................................. 66
cut to print..................................... 65
Release version................................. 70
Restarting a job................................. 45
RFID................................................... 28
test.................................................. 72
version ........................................... 70
Schedule of maintenance ................ 88
Scroll speed....................................... 52
Sensors............................................... 57
Single mode ...................................... 37
Slew keys........................................... 35
Slewing foil ....................................... 44
Sprockets ........................................... 86
Squeegee
bail arm, cleaning......................... 86
bail arm, replacing ....................... 89
foil, replacing................................ 88
Squeegee, foil.................................... 88
Static Settings.................................... 58
Statistical Diagnostics...................... 84
Substituting
foil .................................................. 44
material.......................................... 41
Support First....................................... 2
System Log........................................ 80
level................................................ 50
System overlap settings .................. 51
System Settings ................................ 49
display scroll speed ..................... 52
language........................................ 56
material selection list................... 54
numeric units................................ 55