Road transport
09 / 400
Front protection
Unfolding headers up to a transport width of 3,0 m are
fitted with an unlighted transport protection.
ll foldable headers up to a transport width of 3,3 m are
fitted with a lighted transport protection.
The connection is made via a standard socket which, if
not available, must be mounted on or below the driver
stand.
The outer unfolding center divider noses are provided
with bores for locking the transport protection.
(see page: divider noses to mount, page 09 / 320)
Front protection with lighting connection
on multicoupler and/or control valve unit
In certain combine makes the lighting connection for the
front protection is integrated into the general supply line
(M) to the header.
- The front connection is then connected to the
socket (E).
- If required, the front protection is connected via
another individual connection.
Instructions of the combine manufacturer to follow!
Transport on public roads
It’s not allowed to transport the corn header on public
roads without transport protection.
The maximum admissible height of the slewing arm of the
ejecting channel on the transport on public roads is about
0,45 m as measured on the front protection (H) and is
determined for each machine in the separate licensing
documents.
Road transport licensing and
TÜV-regulations as well as instructions
of the combine manufacturer absolutely
m to observe.
A TÜV-expertise is enclosed to
each machine.
To Next Page
Loading...