Corn header to unpack
09 / 000
Scope of supply / state at time of supply
Subject to model and type the header can be supplied in
horizontal position or upright on a shipping crate.
Each consignment is accompanied by a detailed and type-
referred packing list.
Packages attached to the header to remove.
Check the scope of supply!
Check the supplied row distance!
Ensure the safe standing of the
machine!
Remove the shipping crate
Extend the supports (S). Move the hoist to the bottom side
of the header.
Suitable chains or belts to attach to the drawbar eyes (W),
slightly to lift and hoist slowly to move away from the
header.
Header carefully to lower considering the tilting angle.
Use hoist, which is strong enough!
Do not go into the dangerous zone!
Follow the instructions for hoists!
Remove screws (B) and shipping crate.
Further use of the trestle
The trestle (T) is recommended to be stored for a later use.
Possible after-season and service works are to be
performed easier with the machine standing in upright
position.
Folding corn headers to lift by crane
Folding headers are possibly supplied without shipping
crate (T).
For the transport with hoists only provided eyes (L) and
location on the front transport angle (S) to be used.
If required, transport protection to remount.
Before mounting the header to the combine, transport
protection to remove (S).
Protection to remove only when the header stands on firm
ground.
To Next Page
Loading...