Warning label (pictograms)
ISO 11684
Prior to performing maintenance and repairing
works, the motor to turn off and the key to withdraw! It’s only allowed to go into the dangerous zone
when the lifting cylinder safety is put in!
Keep off the dangerous zone between During the operation guards must not
header and machine! be opened or removed!
Whilst motor is running, guards never to Whilst the motor is running, guards must not be
open or remove! opened or removed!
Keep a sufficient safety distance to the header. Never go into the slewing range of
Prior to maintenance works or clearing of cloggings the machine!
header to switch off, motor to stop and key to
withdraw!
01 / 030
To Next Page
Loading...