Help in case of malfunctions
10 / 915
Trouble: Cause: Remedy: Page:
Cross conveying auger
Cross conveying auger stops during
operation
Overload Material quantity to reduce
Chaff portion too high
Sliding clutch responds Foreign bodies to remove
Stripper to check
09/800
Drive Chain and clutch to check 10/400
Original combine splashboard
mounted in front of the gathering
channel
Splashboard to remove
09/080
Auger half of folding header stops
Driver clutch Adjustment and gearing to
check, axial spring-loaded
half to check for function
(lubrication)
09/760
Locking of the header Exact locking to assure
09/240
Auger ejects corn cobs out of the
machine
Speed To check via monitor 09/440
Position of the conveying aids Position to check via table
09/720
Insufficient feeding Advance to increase
To Next Page
Loading...