To Next Page

To Previous Page

ProfiLux 4 Resource Guide

EN 2018-13-11 66

TIP: Temperature dependent light reduction

ProfiLux includes a feature called

Temperature dependent light reduction

This feature links your temperature probe to your lighting timers. If your tank

temperature rises above a certain point, this feature will automatically turn

off your lights to prevent further heat transfer. This feature comes in handy

for those running T5 or MH lighting.

Temp. Dep. Light red. will be covered in this section.

To setup non-dimmable lighting timers, please follow these steps:

CREATING THE FUNCTION

1. Connect to the P4 using GCC.

2. Click on the (+) icon to the left of

Illumination

and select an unused ILLUMINATION

channel.

3. Uncheck the box, DIMMABLE.

4. Give this Illumination channel a name. For example,

T5 Daylight

5. Click NEW and specify when you want this Illumination channel to turn ON and turn

OFF.

ASSIGNING THE FUNCTION

1. Click on the (+) icon to the left of

System.

Other manuals for GHL ProfiLux 4

Questions and Answers:

Need help?

Do you have a question about the GHL ProfiLux 4 and is the answer not in the manual?

General