GW Instek GDM-8261A - Page 150

GDM-8261A User Manual
150
2. Press the Down key and the
Right key repeatedly until the
GATEWAY selection display
appears.
Note: The gateway can only be
edited if DHCP is off.
TRIG
3. Press the Down key. The
GATEWAY address selection
appears.
G1 G4G2 G3
The gateway address is divided in 4 groups;
G1:G2:G3:G4. The cursor will be flashing on G1
(indicated by ―X‖).
4. Use the Left/Right keys to
move the cursor to the G1 value
and select a digit.
HOLD TRIG
5. Press the Up/Down key to edit
the selected digit.
6. Press the Enter key to confirm
and automatically go onto G2.
AUTO
ENTER
7. Repeat steps 4 to 6 for G2, G3 and G4.
www. .com
information@itm.com1.800.561.8187