GW Instek MSO-2000EA - Page 123

ADVANCED CONFIGURATION
123
Parallel
All read words are shown in purple (no
clock) or white (a clock is defined among
the channels).
CAN:
Purple = Error frame, Data length control
(DLC), Overload.
Yellow = Identifier.
Cyan = Data.
Orange = CRC.
Red = Bit stuffing error
LIN:
Purple = Break, Sync and Checksum
errors, Wakeup
Yellow = Identifier, Parity
Cyan = Data
Red = Error type
Error
Indicator/
Missing Ack
If there is an error/missing acknowledgement in
decoding the data, a red error indicator will be
shown.
Bus Indicator
The Bus indicator shows the bus position. The
active bus is shown with a solid color. The Variable
knob can be used to horizontally position the Bus
indicator when it is active.
Active bus
(solid indicator)
Activated bus
(transparent indicator)
Trigger
Configuration
Shows the bus trigger (B) and the Trigger On
settings. Please see page 173.