PEL-2000 Series User Manual
112
Local Mode Operation
Each channel can be edited by its local load module. Depending on
the configuration, local changes can be reflected on the mainframe.
For this section all operations refer to knobs and buttons on the
local load module panels, unless stated otherwise.
Local Mode Operation .................................................... 112
Selecting a Channel ........................... 113
Selecting Static/Dynamic ................... 114
Turning on the Load ........................... 115
Shorting ............................................. 116
Display Output View .......................... 117
Editing CC /CR/CV A/B Value ............. 118
To Next Page
Loading...
