GETTING STARTED
89
Interface and File System
Interface
Background
The PEL series support RS232, GPIB and USB
remote frame control. Only one type of connection
is supported at any one time. For more information
on remote control please see the GW Instek
website at www.gwinstek.com
or see your local
distributor about the PEL-2000 programming
manual.
For connection options and configurations see the
options below.
RS-232 configuration. Page 196
RS-232 pin connection. Page 233
GPIB configuration. Page 198
GPIB pin configuration. Page 234
USB configuration. Page 199
File System
Background
The PEL series is able to save and recall a number
of different data types for each channel:
Presets
Memory
Setup
SEQ (Sequence)
All data types can be saved and recalled to internal
memory or saved to a USB flash drive. Each
channel has its own dedicated memory for each
To Next Page
Loading...
