GW Instek PEL-2004 - Adjusting the Frame Control

OPERATION
187
Adjusting the Frame Control
Background
Frame control is used to control a number of
different frame linked mainframes (slaves) with a
master mainframe. For information on frame
control, frame control interface and connection see
pages 54 & 236.
Panel operation
1. Connect the mainframes using a
frame link connection.
Page 54.
2. On the master mainframe, press
the Shift Key then the Help key
to access the Utility menu.
3. Press F5 (Other Menu).
03/02/09
10 : 30
ConfigureOther
System
Info
Load Interface Time Set
4. Use the Selector knob to
highlight FrameCONT.