GW Instek PEL-2004 - Channel Selection

OPERATION
121
Channel Selection
Background
There are up to 2 channels per load module,
depending on the model. The main display can be
used to control each channel individually.
5. Press the CHAN button.
Mainframe
Channel selection
6. Select a channel by turning the
Variable knob.
The channel selection appears highlighted in
orange on the top right of the screen.
03/02/09
10 : 30
CC
Dyna
High
ConfigureConfigure
Mode
CC
Dynamic
CH1
Range
High
Main
7. Press the Selector knob or Enter
to confirm.