GETTING STARTED
43
Load Connections
Precautions and Procedures
Intoduction
The PEL-2000 load generator supports a number of
different load configurations for flexible operation.
Single DUT, single load
Single DUT, parallel load
Multiple DUTs, multiple loads
Multiple DUTs, multiple mainframe loads
Single DUT, parallel mainframes
DC loads
Low voltage connections
The PEL-2000 also supports a number of different
control methods and interfaces. The connections
used are described here:
Frame link
Channel control
Go/NoGo
Wire Gauge
considerations
Before connecting the PEL-2000, wire gauge must
be taken into account. Load wires must be large
enough to resist overheating when a short-circuit
condition occurs as well as maintain a good
regulation. The size, polarity and length of a wire
are all factors in determining if a wire will
withstand short circuiting.
To Next Page
Loading...
