PEL-2000 Series User Manual
182
Accessing the Load Menu
Background
The PEL series is able to automatically start
loading from the last program or load setting.
If Auto Load On is set to Load, the last load setup
used before the machine was reset will
automatically start to load upon startup.
If Program is set as the Auto Load On
configuration, the last program executed will start
upon the next start up.
Parameters
Auto Load ON/OFF
Auto Load On
Load/Program
Panel operation
1. Press the Shift Key then the Help
key to access the Utility menu.
3. Press the Selector knob, then
turn to choose Auto Load.
To Next Page
Loading...
