GW Instek PEL-2004 - Saving;Recalling Sequences to USB

PEL-2000 Series User Manual
224
Saving/Recalling Sequences to USB
Background
There are two options to save or recall Sequences to
a USB flash drive. Sequences can either be saved
from all channels or from the current channel only.
Save All: Every channels’ sequences will be saved
into a directory (ALL00XX) as separate files for
each channel (20XXX_C1.A~ 20XXX_C8.A).
Save Current: The current channel’s sequence will
be saved into the default directory (20XXX_XX.A)
Recall: Sequences can only be recalled for the
current channel. It is not possible to recall all
channels’ Sequences at once.
The file extension *.A is used for Sequences only.
For more information about the file structures see
page 89.
Parameters
Save All SEQ Directory: ALL0000 ~ ALL0099
File: 20XXX_C1.A
Save Current SEQ File: 20XXX_XX.A
Recall Current SEQ
File: 20XXX_XX.A
Panel operation
1. Insert a USB flash drive into the
front panel USB slot.
2. Ensure the USB path has been
set.
Page 208.
3. Press the File key.