GW Instek PEL-2004 - Configuring the GPIB Address

PEL-2000 Series User Manual
198
Configuring the GPIB Address
Background
When using GPIB, an address must be specified.
Parameters Address 01~30
Panel operation
1. Press the Shift Key then the Help
key to access the Utility menu.
2. Press F3(Interface Menu).
03/02/09
10 : 30
O
ConfigureOther
System
Info
Interface Time SetLoad
USB
3. If the Interface mode is not GPIB,
use the Selector knob to edit
Interface.
4. Choose GPIB.
5. Press the Selector knob or Enter
to confirm selection.
6. The GPIB menu appears.