OPERATION
165
Protection Clear
Background
When any of the protection circuits have been
tripped, the Protection Clear function can be used
to reset the alarms.
Panel operation
Ensure the menu is in the
configuration menu. See page 160.
1. Turn the load off by pressing the
load key if necessary.
ON /
OFF
LOAD
2. Use the selector knob to scroll
down to Protection Clear.
3. Press the Selector knob or Enter
to clear all.
Note
The configuration settings only apply to the current
channel, other channels will not be affected.
Setting the CC Voltage Range
Background
The Constant Current Voltage range can be set to
high or low.
Parameter
CC Vrange High/Low
Panel operation
Ensure the menu is in the
configuration menu. See page 160.
To Next Page
Loading...
