GW Instek PEL-2004 - Select CV Mode

PEL-2000 Series User Manual
134
Select CV Mode
Background
The PEL 2000 series electronic load operates in
three different modes, Constant Current (CC),
Constant Resistance (CR), and Constant Voltage
(CV).
When a channel is active, the F1
key can be used to switch
between each operating mode.
Mode
CC
Mode
CR
Mode
CV
Panel Operation
1. Press the CHAN button and use
the selector knob to select a
channel.
2. Press F1 until CV mode is
displayed in the display panel.
Changing the operating mode will only affect the
current (active) channel. Other channels will not be
affected by any changes.
CV mode only operates in High range.