Run Sequence
Background
Like Programs, Sequences must be turned “ON”
before they can be run.
When running a Sequence, the front panel function
keys, number pad, operation keys and selector
knob are disabled for the specific channel(s). The
load module panel is also disabled (bar the display
key) for the specific channel.
Channels that do not have a Sequence can still be
edited by changing channels via the CHAN key or
by using the local load module.
Ensure at least one Sequence has been
created and saved.
Page 151
Ensure the Channel Duration Time
Settings have also been configured and
that no Sequence (CH01~08) that you
wish to run are set to OFF.
Page 155
Panel operation
1. Press FUNC, then Sequence (F2)
to enter the Channel Duration
Time Setting menu.
To Next Page
Loading...
