OPERATION
143
Program Chains
Background
On the PEL 2000, there are up to 12 different
programs containing 10 sequences.
If 10 sequences in a Program Sequence prove to be
inadequate for testing, the PEL2000 series can
chain different programs together, effectively
making a larger Program Sequence. .
Unlike Program Sequences, Program Chains do
not need to be run in numerical order. Up to 12
Program Sequences can be chained together
Panel operation
1. Create 1 or more Program
Sequences.
Page 138
2. If Program Sequences were
created in a different session,
ensure the programs have been
loaded from Setup Memory.
Page 204
3. Press the FUNC key, then
Program (F1), followed by Chain
(F1).
To Next Page
Loading...
