GW Instek PEL-2004 - Adjusting the Speaker

PEL-2000 Series User Manual
184
03/02/09
10 : 30
ConfigureOtherTime Set
System
Info
Load Interface
3. Use the Selector knob to
highlight Month.
4. Press the Selector knob, then
turn to increase or decrease the
Month.
5. Press the Selector knob or Enter
to confirm selection.
6. Repeat steps 3-5 for the Day,
Year, Hour and Minute.
Adjusting the Speaker
Background
The PEL series has an internal speaker for both the
mainframe and load modules. The speaker
function turns On/Off the sound for the UI (key
presses and scrolling). The speaker setting will not
alter the sound for protection alarms or Go/NoGo
alarms.
Parameter
Speaker ON/OFF