PSU Series User Manual
84
2. Operation of both units is the same
as for a single unit. Each unit will
only draw as much power as is
programmed. Please see the basic
operation chapter for details.
3. Press the Output key on
each unit to begin. The
output LED will become lit.
Only operate the power supplies in series if using
units of the same model number.
Only a maximum of 2 units can be used in series.
Ensure that the insulation capacity of the wiring is
sufficient when connected in series. See page 31 for
insulation capacity and grounding details.
To Next Page
Loading...
Need help?
General
