Haemonetics Cell Saver Elite+ - Editing a Settings Group

126 Chapter 7
P/N 130859-US, Manual Revision: AA Haemonetics
®
Cell Saver
®
Elite
®
+ User Manual
3. Enter a name for the new settings group.
Figure 65, Creating a new settings group
4. Touch (Accept). The parameter list for the new settings group
appears.
5. Set the parameters for the new settings group, then touch Done. For
more information, see “Editing a Settings Group.”
Editing a
Settings Group
The parameter list displays the individual settings in a settings group. Follow
the steps below to edit the settings in a settings group.
1. Select a settings group to edit.
2. Touch View. The parameter list appears.
3. Touch a tab to select a bowl size.
4. From the list, select a setting to modify.
5. Touch (Up) or (Down) to change the value for that setting.
Parameters that have been changed from the default setting will have a
dot next to the value.
6. To reset a setting to its default value, select the setting and touch Default.