Haemonetics Cell Saver Elite+ - Applying a Settings Group; Deleting a Settings Group

128 Chapter 7
P/N 130859-US, Manual Revision: AA Haemonetics
®
Cell Saver
®
Elite
®
+ User Manual
4. Enter the password and touch (Accept).
Applying a
Settings Group
You do not need to be in the Settings screen to change the current settings
group. Follow the steps below to apply a settings group to the current
procedure:
1. Touch Active Settings. A drop-down list appears.
2. Select a settings group. The new settings group is applied to the current
procedure and appears on the Active Settings pad.
Note: All changes will take place immediately, except target volume settings if
the current processed volume is greater than the new target volume. In that
case, the new target volume will not apply until the next cycle.
Note: Changing the current settings group will overwrite any manual
adjustments you may have made.
Deleting a
Settings Group
Follow the steps below to delete a settings group:
1. Select the settings group to delete.
2. Touch Delete.
3. Touch Confirm.
Note: The active, Haemonetics Default, and Fat Reduction settings groups
cannot be deleted.