Haemonetics Cell Saver Elite+ - Cart Components and Assembly

Equipment Description 47
Haemonetics
®
Cell Saver
®
Elite
®
+ User Manual P/N 130859-US, Manual Revision: AA
Cart Components
The Cell Saver Elite+ cart has four wheels that ensure maneuverability. The
unit can be tipped back on the rear wheels to pass over power cords, door sills,
and other obstructions. The Cell Saver Elite+ device can be removed from the
cart to allow for easy transport in cars and vans.
Figure 22, Cart components
IV Poles The left IV pole contains the mount for the touch screen, and the right IV pole
contains the reservoir weigher. Both poles can be easily lowered and locked in
the down position for ease of transport.
Device Mount The device mount is the flat plate that the device rests on. A backstop at the
rear of the mount supports the back of the device and two locking pins near the
front of the mount lock the device into place.
Wheels The wheels can be locked to secure the cart in position. The right rear wheel
provides antistatic protection.
1.
6.
3.
7.
9.
5.
11.
8.
10.
2.
4.
1. IV poles
2. Backstop
3. Device mount
4. Mounting pins
5. Wheels
6. Saline hangers
7. Handle
8. Processing set tub
holder
9. Step plate
10. Antistatic wheel
11. Removable bins