16 We reserve the right to make changes of a technical nature
Information about the FWB, FWQ distribution board range
Integrated cabinet mounts
The distribution board is available with two dierent mounts: Basic and Quickset.
Basic mount: The FWB (B stands for basic) cabinet has four pre-installed brackets made from 2 mm steel
for mounting the cabinet. The cabinet is mounted to the wall with 4 screws which are pushed through the top
and bottom parts of the cabinet and these 4 brackets. The two top brackets have a key hole. Once the four
wall plugs have been installed in the wall, the two top fixing screws can be installed first. The cabinet can
then be mounted. The two bottom screws can then be pushed into the wall plug from the front.
Key hole dimensions, basic mount
Packaging
Installation sequence, basic mount
1. Draw markings in the packaging onto wall
2. Drill holes and insert wall plugs, then screw the 2 top screws into the wall plugs
3. Mount the cabinet
4. Screw the two bottom screws through the cabinet and into the wall plugs
1
3
2
4
To Next Page
Loading...
Need help?
General
