30
Factory def
Factory defFactory def
Factory default settings
ault settingsault settings
ault settings
The SSP180/220 has been programmed at
the factory with default settings to simplify the
initial setup procedure. If possible, connect
your source components to match the below
settings.
Source 1
Source 1 Source 1
Source 1 (DVD player with HDMI)
• HDMI — input 1 (37) HDMI MPCM
• S-Video — input 1 (23)
• Composite Video — input 1 (20)
• Analog Audio — input 1 (39)
• Digital Audio – HDMI (37)
Source 2
Source 2Source 2
Source 2 (Set-top box with HDMI)
• HDMI — input 2 (37)
• S-Video — input 2 (23)
• Composite Video — Input 2 (20)
• Analog Audio — input 2 (39)
• Digital Audio – HDMI (37)
Source 3
Source 3 Source 3
Source 3 (Media Server with HDMI)
• HDMI — input 3 (37)
• S-Video — input 3 (23)
• Composite Video — input 3 (20)
• Analog Audio — ‘Setup’ menu input 3
(39)
• Digital Audio – HDMI (37)
Source 4
Source 4 Source 4
Source 4 (DVD player with component video)
• Component Video — input 1 (34)
• S-Video — input 4 (23)
• Composite Video — input 4 (20)
• Analog Audio — input 4 (39)
• Digital Audio Coaxial — coax 1 (28)
Source 5
Source 5 Source 5
Source 5 (VCR)
• Component Video — input 2 (34)
• S-Video — input 5 (23)
• Composite Video — input 5 (20)
• Analog Audio — input 5 (39)
• Digital Audio Coaxial — coax 2 (28)
Source 6
Source 6 Source 6
Source 6 (Cable TV with component video)
• Component Video — input 3 (34)
• S-Video — input 6 (23)
• Composite Video — input 6 (20)
• Analog Audio — input 6 (39)
• Digital Audio Optical — optical 1 (29)
Source 7
Source 7 Source 7
Source 7 (CD or SACD with balanced audio)
• Analog Audio — input 7 (39)
• Balanced Analog Audio (18)
Source 8
Source 8 Source 8
Source 8 (CD player with digital)
• Analog Audio — input 8 (39)
• Digital Audio Coaxial — coax 3 (28)
Source 9
Source 9 Source 9
Source 9 (Tuner)
• Analog Audio — input 9 (39)
• Digital Audio Coaxial — coax 4 (28)
Source 10
Source 10 Source 10
Source 10 (Music Server)
• Analog Audio — input 10 (39)
• Digital Audio Optical — optical 2 (28)
Note: Default settings can be changed in the
Source setup menu. For details refer to
Source Setup chapter on page 56.
To Next Page
Loading...