Halcro SSP220 - Temporary Display; Video Format

62
Temporary display
Temporary displayTemporary display
Temporary display
During normal operation you can make a
‘temporary’ OSD message appear every time
an adjustment is made. There are three
temporary display options: Full, Simple and
Off.
• full — every time there is a change (to
audio stream format, inputs, or volume)
all the OSD data is written to the screen
• simple — some OSD information is
written to the screen
• off — there is no OSD
To change the Temporary disp setting:
o From the Display Setup menu, use the
UP or DOWN keys to highlight Temporary
disp.
o Use the LEFT or RIGHT keys to
change the setting.
o Once the setting is correct, use the
UP or DOWN keys to highlight the next
setting to be adjusted or highlight EXIT to
save and return to the Main Menu.
DISPLAY SETUP
Superimpose On
>
>>
> Temporary disp. Full
Video format Auto
Distance units Feet
OSD output Both
OSD style Default
EXIT
All manuals and user guides at all-guides.com