Halcro SSP220 - Distance Units

63
Video format
Video formatVideo format
Video format
Sources 1 to 6 have their composite video and
S-Video linked to analog audio inputs 1 to 6.
The video format function allows you to select
between composite video, S-video and
Automatic.
• Composite video — the system will select
the composite video input
• S-Video — the system will select the
S-Video input
• Auto — when both the composite and
S-video inputs are connected the system
will select the S-Video input.
To change the Video format setting:
o From the Display Setup menu, use the
UP or DOWN keys to highlight Video format.
o Use the LEFT or RIGHT keys to
change the setting.
o Once the setting is correct, use the
UP or DOWN keys to highlight the next
setting to be adjusted or highlight EXIT to
save and return to the Main Menu.
Distance units
Distance unitsDistance units
Distance units
This setting allows you to define the
measurement units (feet or meters) used in
the Distance setup and during Autocalibration.
To change the Distance units setting:
o From the Display Setup menu, use the
UP or DOWN keys to highlight Distance units.
o Use the LEFT or RIGHT keys to
change the setting.
DISPLAY SETUP
Superimpose On
Temporary disp. Full
>
>>
> Video format Auto
Distance units Feet
OSD output Both
OSD style Default
EXIT
DISPLAY SETUP
Superimpose On
Temporary disp. Full
Video format Auto
>
>>
> Distance units Feet
OSD output Both
OSD style Default
EXIT
All manuals and user guides at all-guides.com