Harris ADC Device Server User’s Guide
Requester Configuration 8-5
Destination Tab
Specify the destination device (the device that receives the requested material). This device
should be a record port of a video disk server. Other devices are not supported in this release.
Server
This is the server name that the destination device is physically connected to. Choose the
correct server from the dropdown menu.
Device
Choose the device name associated with the destination device from the dropdown menu.
Fibre Handle
This is the unique fibre address assigned to the destination video disk. Each video disk on
a fibre network must have a unique address. Valid entries are 0 through 99.
To Next Page
Loading...