EasyManuals Logo

Harris ADC 100 User Manual

Default Icon
128 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #53 background imageLoading...
Page #53 background image
Harris ADC Device Server User’s Guide
Configuration Manager 2-15
Minutes: Specify a time duration, in minutes, for the lookahead window to check. The
valid range is 0 to 59 minutes. Default is 0. This option has no effect unless the
Duration Based Lookahead box is enabled.
Duration Based Lookahead Toggle
When the Duration Based Lookahead box (above) is enabled, enabling the Duration Based
Lookahead Toggle allows the operator to hit the F8 key to toggle back and forth between the
setting chosen above and either an alternate time or the full list.
Enable Toggle Lookahead: Check this box to enable. This setting has no effect unless the
Duration Based Lookahead box is enabled (above). EnablingDefault is disabled.
To g gl e H ou r s : Set an alternate time for toggling back and forth from the default setting
chosen above. Use the F8 key to toggle back and forth between the default time setting
and the alternate time chosen here. The valid range is from 0 to 23 hours. Default is 4
hours.
To g gl e M in u te s : Set an alternate time for toggling back and forth from the default
setting chosen above. Use the F8 key to toggle back and forth between the default time
setting and the alternate time chosen here. The valid range is from 0 to 59 minutes.
Default is 0.
To gg l e t o A l te rn a te Ti m e : Select this option to cause the F8 key to toggle between the
Duration Based Lookahead setting and the alternate time set in the Togg le H our s and
To g gl e M in u te s box to the right.
To g gl e t o F ul l L i st : Select this option to cause the F8 key to toggle between the Duration
Based Lookahead setting and the full list.
Count Lookahead
Look Ahead: Select how many events the lookahead should check. Default is 50 events. If
Duration Based Lookahead (above) is enabled, that setting overrides the setting here in Count
Lookahead. Otherwise, this setting is used. Default is 50 events.
Events to Log Tab
NOTE: For a detailed explanation of the following options, please see the Air Client users
guide. Following is a brief description of each of the following options:

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Harris ADC 100 and is the answer not in the manual?

Harris ADC 100 Specifications

General IconGeneral
BrandHarris
ModelADC 100
CategoryServer
LanguageEnglish