Harris ADC Device Server User’s Guide
3-16 Video Disk Configuration
destination disks in order to ensure redundancy of material across multiple disks. This
function may also serve as a source library of material for distribution to one or more
downstream video disks to provide multiple air channel
Content Servers Fibre Channel Handle. Enter the same number that has been assigned as the
Content Server (source disk).
Disk To Use as Communications Port. Set this to match the ADC NT port number that the
copy commands will be sent to (Example: for a Profile, this value should be left at 0 (or
Self in the NT Server), which causes the copy command to be sent to itself.
Disk Status Tab
The Disk Status tab is informational only. No user-configurable settings are available in
this tab. Click the Refresh tab to update the displayed information.
To Next Page
Loading...
General