Harris ADC Device Server User’s Guide
2-12 Configuration Manager
Options Tab
Options
Switch to Black: Switches to black on the output channel whenever the lists stops. Default is
enabled.
Play Hard Hits: Enables a hard start event to be started by an operator pressing the play
button on the Control Panel. When disabled, an operator is unable to start a hard start
event unless they clear the hard start type. Default is disabled.
COntact Start: Enables the Transmission list to be started by a GPI (General Purpose
Interface) contact. The GPI contact is equivalent to selecting Play on the Control Panel.
Playlists 1 through 16 correspond to contacts 1 to 8 of Card One/Two, respectively.
Default is disabled.
Auto A-B Routing: Overrides an event’s channel settings (displayed in Transmission
window's CH column in Air Client). During transmission, successive primary events are
routed alternatively through switching channels A and B. This function is useful to ensure
that two successive events are not played through the same channel (which is needed
when transition effects such as mixes are defined between events). Make sure both A and
B channel A/V parameters are configured in all devices that are used. Default is disabled.
Play ID Title Mismatches: (Optional feature) Allows mismatched events to play. Default is
enabled.
To Next Page
Loading...
General