Harris ADC Device Server User’s Guide
Video Disk Configuration 3-17
Diagnostics Tab
Diagnostics
Reinitialize.
ReVerify.
Make Input Port. Specify the port as a port for recording material. This should never be
needed as the software automatically changes the port type for record or play out as
needed. This option allows you to manually force the port to be an input port, overriding
the default configuration.
Make Output Port. Specify the port as a port for playing out material. This should never be
needed as the software automatically changes the port type for record or play out as
needed. This option allows you to manually force the port to be an output port, overriding
the default configuration.
Port Status
Manually take the port offline and online. Click the appropriate tab (Off Line or On Line).
To Next Page
Loading...