Harris ADC Device Server User’s Guide
Introduction 5
The client workstations (and the control panels) are where users interact with the ADC Device
Server. A typical automation system comprises enough Air Client workstations to support
several users. At an Air Client workstation, a user creates and edits playlists. Users that have
the proper access rights can also control the transmission lists from the Air Client.
Hardware Control Panel
(Optional) The hardware control panel is a hardware device for controlling the playout of
transmission lists. The hardware control panel contains backlit buttons. While each button has
a specific function, buttons can be customized to meet specific needs. The Air Client supports
multiple control panels, which may be required in multichannel systems.
Media Client Workstation
The Media Client workstation is used to prepare material for air. Media Client uses the dub
list generated by Traffic. The operator then creates material records and writes the records to
the database.
File Server
The file server stores the database and play list files. Through the use of a client, commands
are sent to the file server. The file server then reports back to the client, at which time the client
sends commands to the device server for execution.
The file server does not run any software. Its sole function is to free the device server to
exclusively control devices. The device server reads the play list from the file server (via a
network hub), then executes the play list.
Additional Options
Available options include:
◆ Additional Client (user) workstations
◆ Additional ADC Device Server devices
◆ Additional supported channels
◆ Additional control panels and customization of pushbutton functions
◆ GPI interface
◆ Media preparation
◆ Database conversion
To Next Page
Loading...
General