Harris ADC Device Server User’s Guide
2-10 Configuration Manager
In Figure 2-7, the second video disk is not a protect disk (notice the word Protect does not
appear in parentheses). To undo this, right-click on the second disk, then choose Unsassign.
This action unassigns the second disk and moves it back to Available Media on the right side.
To verify that the protect disk is correctly configured, make sure it appears indented under the
air disk, and not flush left with the air disk. Examine Figures 2-6 (right) and 2-7 (wrong) to see
the difference.
Play List Parameters
Parameters Tab
Name: Enter a name for the playlist.
Options
Rewind Spots: After a spot plays, the automation system rewinds the tape before ejecting it
from the VTR. The tape is rewound to the SOM minus the preroll (on a multi-spot tape,
the tape is rewound to the SOM minus the preroll of the last spot played). Default is
enabled.
Rewind to First Program Segment: After a program plays, the automation system rewinds
the tape to the first segment before ejecting it from the VTR. The tape is rewound to the
SOM of the first segment minus the preroll. Default is disabled.
To Next Page
Loading...
General