Harris ADC Device Server User’s Guide
VTR Configuration 4-3
Diagnostics Tab
Inject Tape
ID: The device name identifies the VTR port. The default VTR name is VTR1. Enter the
name by using up to four characters. When an event is threaded, a fifth character - the
head number - is added to the name.
Compile ID
The name is also used to identify the disk port used to execute secondary data events. If a
disk port’s name matches the ID of a secondary data event, the event is executed. Such
secondary data events include those that delete spots, transfer an archived spot, delete
protect spots, or undelete protect spots.