Harris ADC Device Server User’s Guide
5 Cart Machine Configuration
The following example is a generic cart machine. Your cart machine may have slightly
different options. If necessary, refer to the User Notes for your device for complete
details on how to configure it.
Right-click on the configured device (see Figure 2-2 on page 2-4 and Figure 2-5 on
page 2-7), then choose Properties. A dialog box with multiple tabs appears. Use the left
and right arrows at the upper right to scroll through the other tabs. Each tab is
discussed in order here:
Cart Machine Parameters
General Tab
Device Name
Enter a name (using up to 16 characters) for the cart machine. This name is used to
identify the cart machine during event transmission.
To Next Page
Loading...