Harris ADC Device Server User’s Guide
Configuration Manager 2-19
Mix/Wipe Tab
Enable Mix/Wipe Support
Play Mixes/Wipes Early: Causes the list to pull back any events with the effect type of Mix,
Wipe, or Mixed Transition.
A Wipe effect requires a Wipe number. Each brand of Master Control Switcher may have
its own set of Wipes. Each event can have its own wipe number. These are displayed and
edited in Effect Number # field in the playlist editors of the Air Client. When the event is
played, the Wipe number in the event is passed to the switcher when the Wipe transition
is started. The Wipe number is solely dependent on the Master Control Switcher being
used and is not interpreted by the automation as anything but a number. Default is
disabled.
Effect durations in frames
Set the frame values for slow, medium, and fast effect durations. Effect durations are the
amount of overlap time between the end of one spot and the beginning of the next spot.
Slow: Valid numbers are 0 to 999 frames. Default is 60 frames.
Medium: Valid numbers are 0 to 999 frames. Default is 30 frames.
Fast: Valid numbers are 0 to 999 frames. Default is 15 frames.
To Next Page
Loading...
General