Harris ADC Device Server User’s Guide
I-4 Index
R
Recording, allow on video disk, 3-9
Recording, back to back, 3-9
Reinitialize device (cart machine), 5-5
Release tension when cued, 2-13
Reporting tab, 6-6
Requester
Distributor tab, 8-6
General tab, 8-2
Overview, 8-1
Qualifiers tab, 8-3
Routing tab, 8-4
Requirements, 1-1
Rewind compile material, 2-11
Rewind spot, 2-10
Rewind to first program segment, 2-10
Routing
Baseband, 9-3
S
Secondary record event, 10
Secondary record events, 3-9
Security
Protecting the password, 1-6
Segment play/record, enable, 3-11
Send disk EE mode commands, 3-13
Server, configuring, 2-1
Skip bad events, 2-13
Software, optional, 5
Spot, rewind, 2-10
Standbyoff for tension release, 4-2
Station ID on skip, 2-13
Stop disk play/record on init, 3-2
Supported devices
Annotators, A-6
Audio carts, A-4
Barcode readers, A-5
Cart machines, A-2
Character generators, A-4
GMT, A-6
M/C switchers, A-2
Routers, A-3
SERCOM, A-5
Still stores, A-5
Switch-only, A-4
Video disks, A-1
VTRs, A-1
Switch to black, 2-12
Switcher latency, 6-2
Switch-only
General tab, 7-3
GPI Sheet tab, 7-5
Overview, 7-1
Prerolls/Postrolls tab, 7-4
System components, 4
System inputs, 6-4
Black input, 6-4
Colorbars, 6-4
Initial input, 6-4
StationID, 6-4
System requirements, 1-1
T
Tension after up counter, 2-13
Tension, release when cued, 2-13
Thread after break, 2-13
Threaded, keep list, 2-13
Traffic department, 3
Transfer switch, 4
Transmission lists, 9
U
Update event durations from disk, 3-2
Update on-air time, 2-13
Upgrading from DOS to NT, 1-7
Use instant prerolls, 3-6
Use postroll, 3-6
Using in a broadcast environment, 3
V
Video disk
Additional port of same disk, 3-4
Allow recording, 3-9
Archive tab, 3-12
To Next Page
Loading...
General