Harris XL Series - Page 54

14221-1850-2000, Rev. A
54
4. Scroll up or down to highlight the desired scan list. Press the Group/Channel Select Knob. When
scanning is started, indicates the active scan list; when scanning is stopped, indicates the active
scan list.
5. Highlight the desired channel.
6. Press the OPTIONS soft key.
7. Highlight NUISANCE DELETE and press the Group/Channel Select Knob.
8. The icon appears next to the channel and it will not be scanned.
9. Highlight the channel, press the OPTIONS soft key, and select ADD BACK to add channel back to
scan list. If you do not add the channel back to the list, the channel returns to the scan list when you
cycle radio power or activate a personality.
10. Press the BACK soft key to exit the channel list.
11. Press the BACK soft key to exit the scan list display.