Harris XL Series User Manual

14221-1850-2000, Rev. A
77
3. Scroll up or down to highlight SITE ROAMING and press the Group/Channel Select Knob to toggle
Wide Area System Scan ENABLED/DISABLED.
4. Select BACK to exit the scan menu.
5.13.8 Site Lock
The Site Lock feature provides a list of available, adjacent sites that the user can lock the radio to. This
restricts the radio from roaming between sites. Up to 512 sites can be programmed to the radio.
Site Lock is only supported on P25 Trunked Systems with Enhanced CC Scan enabled.
A button on the control head or KMM can be programmed to access the Site Alias list
(see Section 6.4).
1. Press the Menu button.
2. Navigate to the SCAN menu.
3. Highlight SITE ALIAS.
4. Press the Group/Channel Select Knob to display the list of available sites. If a Site Alias is programmed
for the available site(s), it is displayed here. Otherwise, the system name is displayed.
5. From the OPTIONS menu, select LOCK SITE or SWITCH SITE.
NOTE

Harris XL Series Specifications

General

Battery Type	Lithium-ion
GPS	Yes
Bluetooth	Yes
Dimensions	5.5 x 2.5 x 1.5 inches
Operating Temperature	-30°C to 60°C
Operating Modes	Analog
Encryption	AES
Modulation	FM