Harris XL Series - 4.23 STOP SCAN

14221-1850-2000, Rev. A
52
4.23 STOP SCAN
1. Press the Menu button.
2. Navigate to the SCAN menu.
3. Scroll up or down to highlight STOP SCAN and press the Group/Channel Select Knob.
4. Press the BACK soft key to exit the scan menu.
Or
1. Press the Menu button.
2. Navigate to the SCAN menu.
3. Scroll up or down to highlight SCAN LISTS and press the Group/Channel Select Knob.
4. Press the STOP SCAN soft key.
Or
A button on the control head or KMM can be programmed to start/stop scan.
If button is programmed for start/stop scan, the menu for starting and stopping scan is
disabled.
See Section 6.4 for the various options that can be programmed to the control head
buttons.
NOTE
NOTE