Harris XL Series User Manual

14221-1850-2000, Rev. A
69
4. Highlight ENABLED and press the Group/Channel Select Knob to toggle YES/NO.
Or
A button on the control head or KMM can be programmed to enable/disable Bluetooth.
5.10.2 Pair Devices
To pair devices:
1. Press the Menu button.
2. Navigate to the UTILITY menu.
3. Highlight BLUETOOTH and press the Group/Channel Select Knob.
4. Highlight PAIRING MGMT and press the Group/Channel Select Knob.
5. Make sure device being paired is powered on and has discovery mode enabled to pair with the radio.
If no devices are found and Bluetooth is enabled, only the ADD NEW soft key is available. If devices
are paired, the OPTIONS soft key appears.
6. Press the ADD NEW soft key to select a device to pair.
7. A list of available Bluetooth devices appears.
8. Press the REFRESH soft key to refresh the device list if the desired device does not appear.
9. Scroll up or down to highlight the desired device and press the PAIR softkey.

Harris XL Series Specifications

General

Battery Type	Lithium-ion
GPS	Yes
Bluetooth	Yes
Dimensions	5.5 x 2.5 x 1.5 inches
Operating Temperature	-30°C to 60°C
Operating Modes	Analog
Encryption	AES
Modulation	FM