Harris XL Series - 5.13.7 Wide Area System Scan (P25 Trunked)

14221-1850-2000, Rev. A
76
5. Select ADD SCAN LIST.
6. Highlight the newly added scan list and press the VIEW/EDIT soft key and then select EDIT SCAN
LIST.
7. Scroll left or right to display the desired system.
8. Scroll up or down to highlight the desired group/channel and the OPTIONS softkey. From the options
menu, you can add/delete channels from the scan list and set/remove Priority 1 and Priority 2 channels.
When a custom scan list is selected, that list is scanned any time scanning is enabled for
any Trunked, conventional, or P25 Conventional system. To scan only the channels
assigned to a system, custom scanning must be turned off.
5.13.7 Wide Area System Scan (P25 Trunked)
Wide Area System Scan (WASCAN) causes the radio to roam across mobile systems when the currently
selected system's control channel is lost. The radio will scan the control channels of other systems.
To enable/disable Wide Area System Scan:
1. Press the Menu button.
2. Navigate to the SCAN menu.
NOTE