Starting up the ClipX
ClipX
a4643-1.0 HBM: public 59
Connecting
1. Launch your web browser.
The latest versions of Firefox, Chrome and Microsoft Internet Explorer (ver-
sion 11 or higher) are supported and have been tested by HBM.
2. Enter ClipX/ or http://ClipX/ or http://ClipX.local in the address bar.
The Home page is displayed.
If you have already changed the device name, you must enter the new name in
place of ClipX. If you have forgotten the name, try one of the alternative options.
Alternative options
If the method described above does not work, in Windows 7 or higher you can
try the following (detect via UPnP):
1. Open Windows Explorer.
2. Click on Network.
3. In the Other devices section you should see the ClipX device (with the
device name, factory default ClipX).
4. Double-click on the icon.
If you know the device's IP address, you can also type it in your browser's
address bar, e.g. http://192.168.169.130.
Install one of the following apps from the Google Play Store if you want to con-
nect the ClipX using Android:
Important: Do not use https; only http.
Click on in the header and the SYS LED on the ClipX you are using
will flash red/green.
To Next Page
