HEIDENHAIN iTNC 530 HSCI - Page 129

11 – 130 HEIDENHAIN Service Manual iTNC 530 HSCI
8 Observe the states of the selected operands with certain machine functions.
Saving the
WATCH LIST file
After you have created a WATCH LIST file, you can save it in order to be able to call it again at a later
date:
8 Press the PGMMGT key. --> The program management opens and the cursor is placed on the file
TEMP.WLT in the path PLC:\DEBUG.
8 Press the COPY soft key.
8 Enter a target file (e.g. Watch123.wlt) and press the OK soft key.
Calling a
WATCH LIST file
A saved WATCH LIST file can be called any time:
8 Open the WATCH LIST function.
8 Press the PGMMGT key. --> The program management is opened.
8 In the path PLC:\DEBUG, place the cursor on the saved WATCH LIST file (e.g. Watch123.wlt).
8 Press the ENT key. --> The file is loaded in the WATCH LIST function.
Note
If the cursor is in the SYMBOL or ADDR column, you can sort the list alphanumerically by pressing the
ORDER soft key.