February 2012 11 – 133
Deactivating and
closing the
I/O-FORCE LIST
8 Press the EMERGENCY STOP button.
8 Press this soft key. --> OFF must be highlighted!
8 As a precaution remove all PLC operands in the I/O-FORCE LIST with the DELETE LINE soft key.
8 Exit the function I/O-FORCE LIST with the END soft key.
8 Exit the PLC mode.
8 Restart the control for safety reasons.
After having worked with the I/O-FORCE LIST, it is essential that you terminate this function!
To Next Page
Loading...
