14 – 198 HEIDENHAIN Service Manual iTNC 530 HSCI
Transferring
data from the
USB flash drive
8 Switch to the Programming and Editing operating mode (for TNC data) or to PLC programming
(for PLC data) and press the PGMMGT key.
8 Place the cursor on the USB0:\ directory (or on the subdirectory from which you wish to take
the data).
8 Press the WINDOW soft key (you may have to switch to next soft-key row). --> The display changes
to split screen:
8 Place the cursor in the right half on the directory or subdirectory to which you wish to transfer the
data.
8 Return to the other side now.
8 Select a file or a directory.
To change to the PLC partition you must have entered the PLC code number before.
In the following description the program manager is set to Enhanced 1 mode.
--> See ”Settings in the program manager” on page 13 – 174.
Press the soft keys PATH and FILES to activate the respective view.
To Next Page
Loading...
